NICE TT4 Control unit for 1 motor up to 1000 W

Control unit for 1 motor up to 1000 W. Receiver with 433.92 MHz frequencies, rolling code Miniaturized control units

The TT4 control units allow you to control mains voltage single-phase asynchronous motors with COMMON-UP-DOWN type connections, used for the automation of awnings, shutters, skylights and similar. The TT4 control unit can control only one motor independently (each motor stops with its own limit switch). The TT4 control unit incorporates a radio receiver that operates at the 433.92 MHz frequency with rolling code technology which guarantees high levels of security. For each control unit it is possible to memorize up to 30 radio controls from the ERGO, PLANO series or VOLO S RADIO radio sensors. After each command the motor is kept powered for approximately 2.5 minutes, an electric limit switch present in the motor or in the automation interrupts the movement at the desired position. The programming of additional functions can be carried out from the transmitters, an acoustic "beep" will guide the various phases. The TT4 control unit can be activated via two buttons: one with an "up" function, the other with a "down" function or via Bus (TTBUS). Optional wind, sun and rain sensors can automatically control the control panel when weather conditions require it; the adjustment of the "sun" and "wind" intervention thresholds is possible via two trimmers present in the control unit