ELKRON 80SD4C00123 IP55 thermal detector

IP55 thermal detector based on the deformation of a bimetallic element which, when the temperature is reached, closes a clean contact. This makes the detector easy to interface with any type of board. The detector can operate, based on the type of thermal probe used, in the following ways: DF: gradient detector. The intervention occurs only when the temperature increases by more than 13°C per minute. SD: semi-differential detector. The intervention always occurs when the calibration temperature is reached and furthermore the intervention is brought forward when the temperature increase is greater than 15°C per minute. MAX: maximum temperature detector. The intervention occurs only when the calibration temperature is reached. The code SD4J00123 refers to the sensor with a calibration temperature of 60°C. Other gradations are available and must be mentioned in the order. Operating principle: deformation of bimetal element Working temperature: 190°C max Relative humidity: 98% Weight: 0.4 Kg Bimetal component: Nilvar - Brass Adjustment range –40°C/+190°C Intervention threshold: On request /mod SD Max 88°C Alarm condition: Normally closed contact Contact capacity: 2.5 A Working voltage: 48 Vdc Enclosure material: aluminum alloy Dimensions (wxhxd): 92x167x67 mm