INIM FIRE EITK2000 Kit for configuration - maintenance and diagnosis of Iris and Enea series devices

Kit for configuring- maintaining and diagnosing Iris and Enea series devices - consisting of EDVR2000 manual programmer and loop driver- EITK-PWSP- 27-6V power supply- Firegenius-PRO software and connection cables.

EITK2000 is a kit consisting of the EDRV2000 driver, the FireGenius-PRO software and a series of accessories for connection and power supply. The EDRV2000 driver, thanks to its ergonomic shape, allows you to easily perform manual addressing operations of the analog addressed devices of the Enea series if you do not want to use the automatic addressing function provided by the INIM control panels. The driver is also equipped with the “ICP” communication port through which it is possible to connect to the Iris and Enea series fire alarm detectors and configure their operating parameters (Alarm tones/messages selection, volume, blink power, etc.). Through the Firegenius-PRO driver and software, it is also possible to customize the tones/messages of the beacons, drawing from the extensive library made available, composing the tones to your liking or starting from audio files. The kit also allows you to take full advantage of the unique features offered by the LoopMap and Versa++ technologies integrated in the ENEA series addressed analog detectors. By connecting the EDRV2000 driver to the loop and interfacing it with a PC running the FireGenius-PRO software, it is possible, thanks to LoopMap technology, to reconstruct the wiring map of the loop itself. The various connected devices will be identified by identifying them through their unique serial number and their type. The Firegenius-PRO software is able to reconstruct the wiring order along the cable and to recognize and trace any “T” junctions present along the way. The wiring will be shown by the Firegenius-PRO software in graphic form. By clicking on the elements of the system, you can know their status (smoke level, contamination, etc.) and you can interact in real time, for example, by activating LEDs or outputs. The EIKT2000 kit also uses Versa++ technology, thanks to which it is possible to manage the conventional IRIS series fire detectors and configure each sensor according to the specific conditions of the environment in which it will be installed. With EITK2000 it is possible to connect to a line of detectors and, for each of them, perform a complete diagnosis to test their operation, verify the value read in real time, read the contamination value of the optical chamber, change its sensitivity and operating mode. The kit also allows you to read the non-volatile memory, present in each detector (both of the Iris and Enea series), which contains the graph with the smoke concentrations and temperatures measured in the period before the last alarm detected (a function aimed at investigating the causes triggering the alarm). The tool also makes it possible to carry out accurate diagnoses by identifying where the cable is interrupted or where it is short, it allows you to perform tests on the loop (walk test) by monitoring the number of communication errors and storing the date and time of activation of each sensor, providing a professional and printable report at the end of the operations. The EDRV2000 driver contained in the EITK2000 kit is able to work autonomously thanks to the internal batteries, the keyboard and the display it is equipped with. On the other hand, when the driver is connected to the PC, it powers and recharges the batteries from the USB port. The EITK2000 kit is a professional tool that cannot be missing in the toolkit of a firefighting professional. The kit comes in a convenient bag complete with a 24Vdc power supply, cable box and software CD.