JUNG 2501UP KNX built-in actuator - 1 blind channel - with 3 binary inputs

The output (O1) allows the control of blinds, shutters and electric drives. awnings, vents or similar curtains for 230 V AC mains voltage. The relay contacts for the movement directions (up, down) are bistable, i.e. the last switching state is also set remains intact even in the event of a mains voltage failure. The functions that can be preset with the ETS for the Venetian exit include, for example separately configurable travel times, extended feedback functions, assignment to up to 5 different safety functions, an extensive sun protection function and integration into scenes or applications in forced position. In addition to the output, the device has three additional inputs, which may have an internal one effect on the Venetian output or, alternatively, influence KNX/EIB separately, depending on the ETS configuration. The potential-free connected switch or button contacts are downloaded to the device via a shared reference potential. With the internal effect, inputs 1 and 2 directly activate the Venetian exit. With the effect on the bus, the inputs can, independently of each other they transmit telegrams for switching or adjusting the brightness of the Venetian blind use of control or value encoder (dimming value encoder, light scene extension)