YLK-DECT-W80B Yealink DECT-IP W80B Base Station

DECT IP antenna to create a single or multi-cell system Attention, the W80B cell alone does not allow the use of DECT terminals, it must be combined with a W80DM DECT cell. Yealink W80B antenna for IP DECT cordless system expandable up to 30 cells (multi-cell DECT system). Support for up to 100 Yealink cordless terminals. Yealink W80B is a small DECT cell, which can be installed on a table or wall, with PoE power supply. To create Yealink W80B IP multicell DECT systems, it is necessary to install at least 1 Yealink W80DM cell (Yealink W80DM does not provide any connection to the terminals and must be seen as a device with management tasks for the Yealink IP DECT system) The Yealink W80B DECT cell supports up to 8 simultaneous calls. It connects to the LAN network. Soon, the RT30 repeater will also be available (currently not usable on this DECT cell). The Yealink DECT system can serve an area of 20 to 50 meters indoors and up to 300 m outdoors (indicative diameter of the coverage area - Varies depending on the shape of the rooms, walls, the presence of shelving and other obstacles to the propagation of the DECT signal). The Yealink W80B DECT IP cell is equipped with only one LAN port so it is necessary to have a dedicated network cable, preferably connected to a PoE switch. Alternatively, a PoE injector or the local power supply can be used for power supply. By installing yealink W80B IP DECT cells so that wireless coverage areas intersect, it will be possible to hold calls-conversations even moving from one coverage area to another (from cell to cell) without the call being knocked down (Handover). It is therefore very important, when designing the system, to carry out tests or in any case to ensure that the cells are located in such a way as to have an overlap of the signal areas between the cells themselves.